Renting a gasoline seam cutter

Petrol seam cutter rental services

A gasoline seam cutter is a faithful assistant to builders and road workers.

It is used where you have to work in the field without the possibility of laying a cable.

The tool has moderate performance and is capable of coping with ordinary tasks of varying complexity.

Many people often confuse it with benzorez, but there is nothing in common between them.

We have already written about how to use a seam cutter here and clearly showed it in the video.

There is nothing complicated in operation, you just need to master a little theory and practice with consumables.

Features and nuances of operating a gasoline seam cutter

The very term “gasoline” seems to suggest that the equipment will run on fuel without the need to connect to the network.

Autonomy is the main advantage of gasoline seam cutters.

They can be used in the construction of roads, at sawmills, or when constructing a new facility far from communication systems.

It is enough to install the disk, fill the unit with fuel and you can start working.

Of course, you can’t do without drawbacks either. The tool has a relatively small power reserve, and its motor is vulnerable to high loads and often fails.

The operator must constantly monitor the pace of work and give the equipment a rest, periodically inspecting the engine.

An important point - it is best to rent a gasoline-powered cutter with a powerful engine.

The more productive the equipment, the lower the chance of damaging the engine during intensive work.

This is especially true when using a tool with an extremely large disk diameter (from 700 mm and above).

A unit with a weak power reserve will simply not cope with the load and will fail quite quickly.

Even when using a powerful motor, constant monitoring of overload is required.

What kind of transport can a gasoline seam cutter be transported

Logistics is another problematic issue in the issue of equipment operation.

Compact models can be easily delivered in ordinary cars like the Lada Largus.

They do not take up much space and do not hamper movement.

This allows you to significantly save on rental costs, because you don’t have to rent additional transport to deliver the equipment.

But with more massive units you can’t do without a truck or mini bus.

Bulky models with disc diameters of 700 mm or more cannot be stuffed into a passenger car; you shouldn’t even try.

If there is no suitable transport in your fleet, you can order the rental of a gasoline seam cutter with delivery - we will deliver the equipment to the site the very next day after submitting your request.

Where are gasoline seam cutters most often used

In terms of functionality, seam cutters are not much different from each other.

The gasoline cutter is an autonomous, but less productive option.

It can be used to perform a wide variety of tasks where it is simply inconvenient to pull the cable:

removal of the roadway;
construction or repair of sidewalks;
cutting concrete on a construction site;
repair of industrial floors and coatings;
cutting concrete-containing materials, etc.

There is only one limitation for use - horizontal surfaces.

A gasoline joint cutter can handle concrete, asphalt, brick and many other materials.

The main thing is to choose the right model.